Art-pro-audio CoolSwitchPro - Isolated A/B-Y Switch User Manual

COOLSwitchPro A/B-Y Switch with Isolation USER'S MANUAL

10 Other Uses Connect your electronic tuner to the THRU jack for tuning on-the-fly. Or, if you prefer, connect your tuner to the OUTPUT B jack (instea

11 frequencies with some guitar pickups when using the COOLSwitchPro, especially with the phase reversed. There are several things you can do to minim

12 WARRANTY INFORMATION Limited Warranty (USA only) Applied Research and Technology will provide warranty and service for this unit in accordance with

13 and you may have other rights, which vary, from state to state. The warranty terms listed above are only valid within the United States of America.

14 SERVICE The following information is provided in the unlikely event that your unit requires service. 1. Be sure that the unit is the cause of the

15 SPECIFICATIONS Connections 1/4-inch TS mono, unbalanced Transformer Turns Ratio 1:1 Dimensions (HWD) 2.00" x 4.65" x 5.00"

www.artproaudio.com E-mail: [email protected] © 2014 Applied Research & Technology COOLSwitchPro CSP-5004-101 V1.1

2 IMPORTANT SAFETY INSTRUCTIONS - READ FIRST This symbol, wherever it appears, This symbol, wherever it appears, alerts alerts you to

3 OVERVIEW The ART COOLSwitchPro A/B-Y Switch with Isolation is a handy foot-operated box that lets you switch an instrument signal (guitar, bass, or

4 • Can be used in reverse to select between two instruments connected to one amp • Passive operation requires no power and provides true bypass •

5 CONNECTIONS All connections are made through 1/4-inch TS (mono) jacks whose function is labeled on the top of the unit. Use shielded cables with 1/4

6 OPERATION PUSHBUTTON SWITCHES (top) Y Pushing this footswitch alternates between connecting the INPUT jack to both the OUTPUT A and the OUTPUT B ja

7 PHASE This switch allows you to invert the phase of the signal to the OUTPUT B jack. This function is only available when the TRANSFORMER ISOLATE s

8 APPLICATION The COOLSwitchPro is a simple product. You might not think there would be much to say about how to use it, but it turns out there's

9 No smoke or sparks? Good. Now turn on the amps and turn up the volume controls slightly. While strumming your guitar or otherwise creating an input