Tube MP/C User’s Manual
6 Phase Switch The Phase switch is provided to reverse the phase of a signal. This switch works on Pins 2 and 3 of the XLR Output jack and also
7 REAR PANEL FUNCTIONS Figure 2 - Rear view Power The Power switch supplies and removes power from the unit. The Tube MP/C should be turned “on”
8 Unbalanced Output The 1/4" output jack provides signal between the shield and the tip. It is intended for use with 1/4" mono plugs.
9 APPLICATIONS The main application of the Tube MP/C is as a microphone preamplifier and compressor. To use the Tube MP/C as a mic or line preampl
10 Special Effects For industrial, metal, or just “flavor” textures, experiment with the Tube MP/C. Overdriving the preamp and compressor circuit
11 WARRANTY INFORMATION: Limited Warranty: Applied Research and Technology will provide warranty and service for this unit in accordance with the
12 SPECIFICATIONS: Input Connections: ... XLR balanced or 1/4" unbalanced Input Impedance: ...
www.artproaudio.com E-mail: [email protected] TubeMP/C 131a-5004-001
II IMPORTANT SAFETY INSTRUCTIONS – READ FIRST This symbol, wherever it appears, This symbol, wherever it appears, alerts alerts you to the
III IMPORTANT SAFETY INSTRUCTIONS – READ FIRST ... II INTRODUCTION ...
1 INTRODUCTION Thank you for purchasing Applied Research and Technology’s Tube MP/C. You’ve undoubtedly noticed that the Tube MP/C is as cool sound
2 OVERVIEW The Tube MP/C (PreAmplifier/Compressor) is a multi-purpose tool for audio engineering and recording. Enclosed in a table-top chassis a
3 Installation The Tube MP/C may be employed in a number of setups including: • Between a microphone and a mixer, digital workstation, or analog
4 FRONT PANEL CONTROLS & INDICATORS Figure 1 - Front view Gain Control The Gain control sets the amount of input gain of the Tube MP/C. Tur
5 producing a clean output when this LED is lit. The next two LEDs are labeled “WARM.” This is the optimal operating range for the Tube MP/C. At th
Comments to this Manuals