Art-pro-audio 310 - 2way/3way Crossover User Manual download pdf

General Overview

The Model 310 is a fourth order Linkwitz-Riley electronic crossover. This

unit may be used in two modes of operation:

Stereo 2-Way -or- Mono 3-Way

The 310 crossover splits the frequency of an input signal into two (when

used as a 2-Way crossover) or three (when used as a 3-Way crossover)

separate signals which may then be sent to amplifiers or other signal pro-

cessing equipment in a sound system.

Power Connections

The 310 has an internal power supply which is designed to operate from

95 to 130VAC at 50/60Hz or from 190 to 250VAC at 50Hz. Power con-

sumption is 12 watts. Make sure the line voltage switch is set to the prop-

er setting before plugging the unit into a mains socket.

Never operate this piece of equipment with the ground pin removed. If the

cord becomes cracked or broken, discontinue use until you can have it

replaced.

Installation

The 310 occupies a 1U rack space and is intended for installation in stan-

dard 19” equipment racks. Its depth is 8.5” and weight is 4.5lbs (2.5kg.)

* Caution: The following must be observed to prevent malfunction-

ing and/or possible equipment damage.

1. Before plugging in the 310 into the main AC line, make sure that all of

the equipment following the crossover outputs is turned off or all of the

inputs are turned down.

2. The unit should only be turned on after it has been established that the

main AC line is supplying the correct voltage.

3. Never change the frequency range switches (from x10 to x1 posi-

tion - or vice versa) with the crossover passing audio signals.

Transients can result and speaker damage is possible.

4. Keep the 310 away from excessive moisture.

1 2 3 4 5 6

Summary of Contents

Page 1

General OverviewThe Model 310 is a fourth order Linkwitz-Riley electronic crossover. Thisunit may be used in two modes of operation:Stereo 2-Way -or-

Page 2

Note: the High 1 and the Input 2 jacks are not used when configured forthree-way. Front PanelPower SwitchThe power switch applies and removes power to

Page 3 - Channel Two controls

3-way front-panel controls (reading from left to right):Channel One controls-Input Level - The mono input level controlLow Mute - Low output muteLow O

Page 4

Power: 95-130VAC, 50/60Hz, 3 VA190-250VAC, 50Hz, 3 VASize: 1.75”H x 19” W x 8.5” DWeight: 4.5lbs. (2.5kg)Warranty and Service InformationLimited Warra

Page 5

9cables themselves are in working condition.2) If you find the unit to be at fault, write down a description of the prob-lem, including how and when t

Page 6 - Model #310

APPLIED RESEARCH AND TECHNOLOGY, INC.215 TREMONT STREETROCHESTER, NEW YORK 14607 USA716-436-2720 voice716-436-3942 [email protected]

Comments to this Manuals

No comments

Art-pro-audio 310 - 2way/3way Crossover User Manual

Browse online or download User Manual for Audio accessories Art-pro-audio 310 - 2way/3way Crossover. ART Pro Audio 310 - 2way/3way Crossover User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Audio accessories Art-pro-audio 310 - 2way/3way Crossover